Dual Sim Setting; Network Settings; Phone Settings; Security Settings - Konrow Stone Guide D'utilisation

Settings

Dual SIM setting

You can select SIM 1 or SIM 2 mode.

Phone settings

Time and date: set the time, set the date, Set the date format,
the time format and update time settings.
Note: If you remove the battery from the mobile phone or if
the battery energy was exhausted a long time ago, you may
need to reset the date and time when re-inserting the battery
or powering on the mobile phone after recharging.
Language: Select the display language for the mobile phone.
Pref. input method: Select yuor favorite method for the text.
Flight mode: The flight mode or Airplane mode.
UART settings: Select the UART 1 or UART 2.
Misc. settings: LCD backlight and picture quality.

Network settings

Select your prefences for the SIM 1 and 2 and for the GPRS
transfer.

Security settings

This function provides you with related settings about safety
use :
SIM 1 security:
Change PIN: To activate PIN lock, you need to input the correct
PIN code. If you set PIN lock to On, you need to input the PIN
each time you power on the mobile phone. In the case you
input a wrong PIN for three consecutive times; you need to
input the PIN Unblocking Key (PUK). The PUK is used to unlock
and change the locked PIN. To obtain the PUK, contact the
network operator.
Change PIN2: To change Sim card 2 code number.
PIN lock: This function enables you to lock/unlock the PIN. Entering
password to switch on or off the phone. Password is required when
the phone is locked. The initial password is 1122.
EN