MAINTENANCE
The SCANLITE Head requires only very little maintenance. To ensure secure operation
please check the following points regularly before connecting the Head to the mains:
•
Ensure that the Halogen lamp and the glass dome are correctly fitted.
•
Do not use water to clean the Zoom Head from dust and dirt.
•
Ventilation grids must be clean and free of any tape etc.
•
When the SCANLITE Head is connected to the mains, check that the fan cooling is
active.
CAUTION:
Under no circumstances open any part of the equipment. The SCANLITE Head is not user
serviceable and there is dangerous high voltage. In the event of difficulties contact your
Elinchrom Service partner.
REGULAR CHECK
National safety regulations may require frequent safety checks of the electrical equipment.
The SCANLITE Head should be checked once a year. This check not only guarantees
safety, it also protects the value of the unit.
RETURN TO CUSTOMER SERVICE
To achieve maximum protection of the unit when sending it in for service, the original
packaging should be kept.
SALES / SERVICE / RENTAL
For service and sales, please contact your local Elinchrom Distributor. For more information,
contact and support, please visit www.elinchrom.com / Distributors
User Manual
EN
11