Connections; Setting The Station Addresses - Burkert 6520 NAMUR Instructions De Service

4.4.1 Connections

4.4.2 Setting the Station Addresses

DIP switch 1 to 7
NOTE
In the Profibus-PA, each station is given an address, These addresses are set up
using the DIP switches 1 to 7.
The permissible address range lies between 3 and 124.
28
Connection PROFIBUS PA
with any polarity
23 - Sensor 2
21 + Sensor 2
13 - Sensor 1
11 + Sensor 1
DIP-switches for setting
station addresses
1 least significant bit (LSB)
8 most significant bit (MSB)
Bit 1 to Bit 7
The DIP switch is only read when the device is switched on.
Type 6520