Functional Description; Intended Use; Operation - Festool CXS Guide D'utilisation

Functional description

The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Torque thumbwheel
[1-2] Drilling symbol
[1-3] Torque Marking
[1-4] Gear switch
[1-5] Right/left switch
[1-6] On/Off switch
[1-7] Belt clip
[1-8] Button for releasing the battery pack
[1-9] Bit store
[1-10] LED lamp

Intended use

Cordless drills are suitable for drilling into metal,
wood, plastics and similar materials as well as in-
serting and tightening screws.
The charger MXC is design for charging the battery
packs listed.
The charger is design for internal use only.
WARNING
The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.

Operation

Changing the battery pack Fig. [2]
Removing the battery pack
Press and hold the button [2-1].
Slide the battery pack downwards to remove.
2
2-1
remove battery pack
insert battery pack
Inserting the battery pack
Slide the battery pack upwards into the machine
like shown in Fig. [2] until it engages.
Changing side of the belt clip
Fix the belt clip [3-1] on the right or on the left side,
depending on which side you prefer to clip the cord-
less drill.
Remove the battery pack Fig. [2].
Remove the belt clip [3-1].
Insert the belt clip on the designated side.
Insert the battery pack Fig. [2].
9