Changing The Cooking Zone Power Setting; Switching Off - Atag HC6471E Mode D'emploi

OPERATION
Expandable cooking zone
1. Touch the expandable cooking zone key to start the second zone circle from the expandable
cooking zone.
The expandable cooking zone indicator light comes On.
▷
Touch the key to stop the extra zone circles.
▷

Changing the cooking zone power setting

1. Press the cooking zone key of the desired cooking zone.
The dot directly below the corresponding display will light up and is assigned to the
▷
visual slide control.
2. Slide your finger over the slide control to change the power setting.

Switching off

Switching off one cooking zone
One cooking zone is switched on. The display shows a power level between 1 and 9, or 'P'.
1. Press the cooking zone key of the desired cooking zone.
2. Use the slide control to set the cooking zone to '0' (off).
▷ The cooking zone switches off.
The hob switches off after 20 seconds if all cooking zones are set to '0' and no other
▷
process is being used.
Switching off all cooking zones
Several cooking zones are active.
1. Press the On/Off key to switch off all cooking zones.
You will hear a beep. All displays are off. The hob is switched off.
▷
EN 13