Saci pumps Optima 25 Manuel D'installation Et D'entretien page 26

ENGLISH
The changes made will not be effective until the OK button is pressed . This text is shown when editing the minutes
F2
of the current time.
The time controller has an internal clock that together with the battery supplied guarantee that the date and time set
will not be lost if there is a power cut.
3 - FILTRATION
In this submenu, the parameters and times referred to in the pump's filtration times can be set.
On the first submenu selection screen, set the days the filtration is required to be active. The filtration options available
are Monday to Sunday (every day of the week) Monday to Friday, only Saturday and Sunday or only Friday and Satur-
day. Filtration can also be completely deactivated.
Press the button to modify the selection. Press to confirm.
F2
If "FILTRATION OFF" is selected, configuration of the remaining parameters will not continue.
If any of the other ranges of filtration days are selected, the process will continue to the selection of daily filtration
cycles. From 1 to 3 daily filtration cycles can be selected in this screen, which can be modified with the button.
Once the daily filtration cycles have been selected, in the following screens start time and the filtration time of each cycle
individually, up to a maximum filtration time of 12 hours per cycle.
4 - AMPERAGE
Access this submenu to adjust the motor's nominal consumption.
Use the button to increase the motor's nominal consumption in increments of a decimals of an ampere, up to
10% above the nominal consumption of the pump, aiming to protect the electric motor.
Press to save the selection. Press to exit without changing the value.
F2 F1
Within this submenu also we have the option to enable detection against dry running.
5 - LIGHTING
This is the submenu for editing the automatic activation of the swimming pool lights, if this automation is required.
By default the lighting programme is deactivated, although it can be activated in a very similar way to adjusting the
filtration cycles in submenu "3. FILTRATION".
On the first screen, select the days on which to activate automatic lighting of the swimming pool, selecting from the
options of Monday to Sunday, Monday to Friday, Saturday and Sunday and Friday and Saturday. Press to modify
F2
the selection. Press to save the selection.
On the following screens set the start time for the lighting activation and the lighting time required, up to a maximum
of 12 hours.
24