Start-Up Wizard; Setup Menu - Saci pumps Optima 25 Manuel D'installation Et D'entretien

-Manual activation of the swimming pool pump, with timer stop, for occasional use.
-Manual activation of the swimming pool lights, also with timer stop, by pressing the dedicated button for this
purpose.
-Programmable output for salt chlorinator activation.
-External intake programmable by remote activation of the pump, for example from a heater, a home automation
system, etc.
-Activation of the pump's external intake by means of a type PT-100 temperature probe (not included as
standard), which prevents frozen pipes.
-Amperimetric protection of the motor against over amperage.
-Protection of the pump against running dry (programmable).
-Alarm sound to indicate anomalies in the pump.
-Partial/total totaliser of the pump's operating hours.
-Failure logging.

12.8. START-UP WIZARD

When starting the unit there is a QuickStart wizard, with the following sections:
a) LANGUAGE
b) DATE (DD/MM/YYYY)
c) TIME (HH:MM)

12.9. SETUP MENU

1 - LANGUAGE
Use the button to modify the language of the menus and alerts. Press
2 - DATE/TIME
In this submenu, the current date and time can be modified, which are very important values because the filtration and
lighting programs depend on the information provided in this point.
The value to modify will flash, making modification more intuitive. The value to be modified can be increased by
pressing the button.
E N G L I S
1 8 / 0 4
B a c k
1 4
B a c k
23
H ( E N )
N e x t
/ 2 0 1 6
N e x t
: 2 7
N e x t
to save the selection.
F2
ENGLISH