Gong RIGID BOARDS Série Guide De L'utilisateur page 42

While holding the Fin, tilting it (front of the base up), insert the rear part of the Fin base with the small metal bar
into the center opening of the rail and slide the Fin backwards on the rail to the desired position.
Push the front part of the Fin down into the rail as far as it will go.
Using the screw or your screwdriver, slide the metal square in front of the screw insert on the front of the Fin.
To remove your Fin, proceed in the reverse order. Unscrew the screw, tilt the fin, slide it out and pull it out of
the rail. Retrieve your square nut.
The placement of your Fin will have a real influence on the behaviour of your Board. A center Fin placed
very forward will give you more manoeuvrability in turns, a center Fin placed farther back will make your
Board more stable for nose riding.
EN
Step 2
Step 3
Step 4
Insert the screw and tighten it firmly.
- 42