Getting Started - VDO AcquaLink Notice D'utilisation

Getting started

Description
AcquaLink 7" is a multifunctional display connected to the VDO CAN bus network of the AcquaLink
system. The display lets you view data from the engines and the sensors connected to Nav Box through
NMEA 2000, NMEA 0183, SAE J1939 or directly connected through analog inputs. Up to four engines
can be monitored from the display.
The Nav Control remote control is necessary to interact with the display.
Operations
AcquaLink 7" is a versatile device. It lets you control all the engines connected to Nav Box in a single
monitoring point and at the same time.
Select the number of engines on the boat when first turned on or when reset. If the selected number of
engines is different from the installed engines, only the data of the selected engines will be displayed.
The number of engines can be changed later (see "Change the number of engines to be displayed" on
page 56).
Received signal priority
If the same data is transmitted by more than one signal for the same engine, the received signal priority
is the following:
1. Analog input
2. NMEA 2000
3. SAE J1939
4. NMEA 0183
48 7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG