Sensor Configuration - VDO AcquaLink Notice D'utilisation

Sensor configuration

Configuration of sensors connected to Nav Box
Configuration of sensors is carried out through the display and transmitted to Nav Box, which then
memorizes it. If there are several AcquaLink displays on the VDO CAN bus network, the same
configuration settings are visible on each display.
Menu layout SENSOR CONFIG
Only sensors connected to display analog inputs can be configured and/or calibrated.
Note*: the units of measure depend on parameter SYSTEM CONFIG > Units
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG 65