VDO AcquaLink Notice D'utilisation page 66

Sensor configuration
Configuration and calibration
Nav Box recognizes the connected sensors and applies the default calibration values. For the engine
data simply set the type of sensor and the value is read correctly. Other sensors can be configured by
setting a correction value for the value read by the sensor. It is possible to configure and calibrate the
fuel level sensor.
Set the engine data sensors
1. Press
2. Scroll and select Engine.
3. Scroll and select the data (e.g. Oil temp). To view factory settings, see "Sensor types" on page 68
4. Scroll and select the type of sensor (e.g. +50 to 150 °C).
5. Hold down
66 7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
to access the main menu and then scroll and select SENSOR CONFIG.
to return to the data pages.