VDO AcquaLink Notice D'utilisation page 63

Icon
Engine alarms
Battery alarms
Other alarms
Menu layout ALARMS
Acknowledge an alarm
When an alarm is triggered, the pop-up appears and the buzzer sounds (if enabled).
To acknowledge the alarm and mute the buzzer, press any button on Nav Control: the pop-up closes
and the alarm is saved in the ALARMS > Active alarms page. The alarm is displayed in the Active
alarms page for as long as it remains active. In addition, the indicator light on Nav Control stays on and
the alarm icon remains visible in the data pages.
View the active alarm list
If at least one alarm is active, press the
ALARMS > Active alarms: the list of all active alarms appears.
Alarm configuration on Nav Box
Configuration of alarms is transmitted from the display to Nav Box, which then memorizes it. If there are
several AcquaLink displays on the VDO CAN bus network, it is sufficient to configure the alarms from
one display. The alarm messages are sent by Nav Box to all the devices.
Alarm
button to access the main menu, and then scroll and select
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Alarm management
63