Getting Started - VDO OceanLink-7 Notice D'utilisation

Getting started

Description
OceanLink Master 7" is a multifunction display that lets you monitor engines and related sensor
parameters. Up to four engines can be connected to the display. The integrated NMEA 2000 gateway
lets you acquire engine data also via analog signals or SAE J1939, to then convert and distribute them
on NMEA 2000 network. The display manages up to six resistive sensors, three voltage sensors and
one digital alarm. All data are also distributed on two EasyLink channels to a maximum of 16 52mm
OceanLink gauges per channel.
NMEA 2000 connectivity lets you view navigation data from other devices on the network, such as
wind, compass, GPS, speed and depth data. Following is an example of an application with two
displays, one used as a gateway and the other as a NMEA 2000 monitor.
Operations
OceanLink Display 7" TFT is a versatile device. It lets you control all connected engines in a single
monitoring point and at the same time. The motor whose data is displayed is selected during data page
configuration.
Received signal priority
If the same data is available from more than one source for the same engine, the received signal priority
is the following:
1. Analog input
2. SAE J1939
3. NMEA 2000
48 7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG