VDO AcquaLink Notice D'utilisation page 69

Setting
Fuel > Sensor type Fuel level sensor
Fuel > Calibration Calibration of the fuel level sensor
Calculate the speed offset factor
The speed offset factor lets you align the speed through water (STW) to the actual speed. If the
measured speed differs from the real boat speed for more than 0.5 kn, this factor can be adjusted.
Increasing the offset factor reduces the displayed speed through water (STW).
Description
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Possible values/commands
2 - 90 Ω
l
3 - 180 Ω
l
240 - 33 Ω
l
Not calibrated: sensor not
l
calibrated manually but with
factory default calibration.
Do 1 point cal: one point
l
calibration
Do 5 point cal: 5 point
l
calibration
Delete cal: eliminates any
l
calibration and restore factory
default settings.
Sensor configuration
69