VDO AcquaLink Notice D'utilisation page 71

Setting
Sort displays
Bind Nav Control to display
Software version
Note*: NMEA 0 ID = engine 1; NMEA 1 ID= engine 2 etc.
Groups of devices
The devices connected to the network through VDO CAN bus and EasyLink can be grouped into seven
groups. Devices belonging to the same group share illumination settings.
Associate the display to a group
1. Press to access the main menu and then scroll and select NETWORK.
2. Select Group instruments: the display blinks and the list of all devices on the network appears.
3. Scroll and select the display.
4. Scroll and select the group to be associated to the display.
5. If necessary, repeat steps 3 and 4 for all devices on the network: each time, the display of the
selected device blinks.
6. Hold down to save settings and return to the data page.
Match an engine to a tachometer
1. Press to access the main menu and then scroll and select NETWORK.
2. Scroll and select Tacho instance: the list of tachometers on the network is displayed; the first on
the list is selected and blinks.
3. If necessary, scroll and select a different tachometer
4. Scroll and select the engine ID to be monitored.
5. Hold down to save settings and return to the data page.
Order of displays on the network
When there are several AcquaLink displays on the VDO CAN bus network, each display is
automatically assigned a progressive ID (1, 2, 3 etc.). The ID indicates the order in which the displays
can be selected through Nav Control. If necessary, the order of the displays can be changed.
Description
Order of displays on the network
Matching between Nav Control and display
Software version of each device on the network
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Management of network devices
Possible values/commands
Numbered list of displays on the
network
List of displays on the network
List of devices on the network and
software versions
71