On/Off
The on/off mode depends on the connection made during installation.
The VDO logo and software version followed by the AcquaLink logo appear when turned on. In addition,
if before turned off the display was controlled by Nav Control or if on the VDO CAN bus network there is
only one display, the Nav Control icon appears.
The display prompts you to select the type of boat and the number of engines to be monitored when first
turned on or when reset.
Function of the display buttons
Button
Function
Briefly press:
Access favorite groups 1, 2 and 3.
l
Function of the Nav Control buttons
Button
Function
Hold down:
Turn on/off Nav Control and all the devices connected to the
l
VDO CAN bus network
Briefly press:
Change the display brightness level
l
Hold down:
Change the color of the background and of the characters on the
l
display
Briefly press:
Return to the previous menu level
l
Hold down:
Return to the last data page displayed
l
Briefly press:
Access the display main menu
l
By briefly pressing and only when data pages are displayed:
Change the favorite group to be displayed
l
By briefly pressing and only if there are several displays on the
network:
Change the display to be controlled
l
By pressing both buttons:
Lock/unlock Nav Control
l
By rotating the knob:
Knob
Scroll the menu items and display pages
l
Briefly press:
Open a sub-menu
l
Confirm the selection
l
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Getting started
49