Diplay Functions - CAPITAL SPORTS 10032213 Mode D'emploi

DIPLAY FUNCTIONS

Note: Only models with display!
MODE/RESET (Select /
Confirm / Erase)
SET (Settings)
HEART RATE (Recovery)
Turn On:
After loading the battery, listen to a sound lasting 2
seconds, in the meantime the display all shows 2
seconds.
Turn Off:
An electronic watch enters into a sleep state after 4
minutes without any signal input.
Boot into motion picture
Press MODE key to choose TIME, DISTANCE, CALORIES, PULSE. Press the
SET key to set the value. Confirm by pressing the MODE key. Inputting signal,
time (TIME), distance (DST), and calories (CAL) to start counting.
• Used for switch Windows TIME,
DISTANCE, CALORIES, PULSE.
• This key has functions of the confirmation
choice, and setting time confirmation.
• Constant Press for 2 seconds to clean the
input settings.
• Press one time will be added one time,
constant press is set as quick adding.
• It can set TIME, DISTANCE, CALORIES,
PULSE numerical values.
It is used to test the athlete's recovery of heart
rate after finishing exercise.
EN
21