CAPITAL SPORTS 10032213 Mode D'emploi page 18

EN
18
5
E Fixing the side armrest with Inner Hex Flat Head Screw B6 (M10*20),
Washer B7 (Ø10).
F Fixing the Display with Inner Hex Flat Head Screw B8 (M10*20) and
butterfly spring B9 (Ø10), then connecting Data Wire plug (e) to (f).
G Re-install Side upper boards (1) and side shells (2).
Moving the Unit
The equipment is equipped with two fixed front wheels.If need to move
the equipment, just lift it slightly and move forward or backward.
Note: As the equipment is heavy, you had better to find a few people to
move together.
Adjusting the Feet
1 unscrew the nut (B).
2 Screwing or unscrewing
the universal foundation
(A) till the equipment stable
and firm.
3 After adjustment, tighten
the nut (B).
6