Sanding Base Brakes; Accessories, Tools; Conditions Of 1+2 Warranty - Festool ETS 125 EQ Guide D'utilisation

Sanding base brakes

The sanding base is braked by a collar (6.1)
in order to prevent any uncontrolled excessive
speed of the sanding base.
6.1
Because the collar wears down in the course
of time, it has to be replaced by a new one
(order no. 489 190) as soon as there is any
reduction in the braking effect.

Accessories, tools

For safety reasons, only use ori-
ginal Festool accessories and tools!
The accessory and tool order number can be
found in the Festool catalog or on the Internet
under www.festool-usa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This pro-
vides protection and storage for the tool and
accessories. The Systainers are stackable and
can be interlocked together. They also can be
interlocked atop Festool CT dust extractors.
– Place one systainer on top of the other.
– Release all four latches on the lower
systainer by pulling back at their top edges
(7.1).
– Slide all four latches upward (7.2).
– Snap all four latches back to their fl at
position (7.3) so they engage the stacking
tabs of the upper systainer.
7.3
7.2
7.1
Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty
(1 year + 2 years = 3 years) for your Festool
power tool. Festool shall be responsible for
all shipping costs during the fi rst year of the
warranty. During the second and third year of
the warranty the customer is responsible for
shipping the tool to Festool. Festool will pay
for return shipping to the customer using UPS
Ground Service. All warranty service is valid
3 years from the date of purchase on your
receipt or invoice.
Festool Limited Warranty
This warranty is valid on the pre-condition that
the tool is used and operated in compliance
with the Festool operating instructions. Festool
warrants, only to the original consumer
purchaser, that the specifi ed tool will be free
from defects in materials and workmanship
for a term of one year from the date of
procurement. Festool makes no other
warranty, express or implied, for Festool
portable power tools. No agent, representative,
distributor, dealer or employee of Festool has
the authority to increase or otherwise change
the obligations or limitations of this warranty.
The obligations of Festool in its sole discretion
under this warranty shall be limited to the
repair or replacement of any Festool portable
power tool that is found to be defective as
packaged with the User Manual.
Excluded from coverage under this warranty
are: normal wear and tear; damages caused
by misuse, abuse or neglect; damage caused
by anything other than defects in material and
workmanship. This warranty does not apply to
accessory items such as circular saw blades,
drill bits, router bits, jigsaw blades, sanding
belts, and grinding wheels. Also excluded
are "wearing parts", such as carbon brushes,
lamellas of air tools, rubber collars and seals,
sanding discs and pads, and batteries.
Festool portable power tools requiring
replacement or repair are to be returned with
the receipt of purchase to Festool (call 800-
554-8741 for address details).
IN NO EVENT SHALL FESTOOL BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDEN-
6