Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NL
SPECIFICATIONS
Model
Reference
Power
Air freshener
Number of speeds
Pre-programmed modes
Oscillation
Adjustable tilting
Oscillation angles
Timer
Digital display
Remote control
Number of blades
Blade material
Voltage
Frequency
Volume level
Grill dimensions
Product dimensions (LxWxH)
Product weight
BEFORE FIRST USE
1. Please read these instructions carefully before using the
appliance and keep them for future use.
2. Check that the voltage of your local electricity network complies
with the one specified on the appliance.
3. Before using the appliance for the first time, remove the
appliance's protective films or stickers.
ASSEMBLY
Turnado_360_a4.indd 11
TURNADO 360° REVOLUTION
TURNADO 360° Revolution
3: Normal/Natural/Sleep
Yes 90° Revolution System
60°/90°/180°/360°
Yes – 1h 2h 4h 8h
LED screen
Yes, with CR2032 battery
Transparent plastic
220-240 V~
45x41x140cm
STEP 1
Put the L screw into the hole located
underneath the base. Place the foot of the
fan onto the base and attach it, tightening
the L screw firmly.
65W
Yes
3
Yes 360°
5
50/60Hz
< 55dB
45cm
8.40 kg
FR
STEP 2
Place the base assembled with the
support tube onto a desk, table or flat
floor. Check that the part which needs
to be connected, located beneath the
support tube, is placed in the correct
position with regard to the holes. Then,
solidly tighten the upper part of the fan
with the large screw.
STEP 3
Unscrew the safety nut and the blade
centre cap from the metal rod in order to
attach the back grill. Place the back grill
onto the metal rod. Tighten firmly using
the safety nut.
STEP 4
Once the grill has been attached, install
the blades into the metal rod.
Then firmly tighten them using the
blade centre cap to help you by turning
anticlockwise.
STEP 5
Assemble the front grill onto the back grill:
To do so insert the hook from the top grill
into the back grill.
Then, clip it all together. Make sure that
you hear all of assembly elements click
into place (slots inside the grill belt).
STEP 6
Now close the grill with the safety latch and
add the screw to block the latch into place (as
shown in photo).
Before switching the appliance on, ensure that
the grill is securely attached.
EN
NL
11
13/11/19 10:35
Publicité
Table des Matières
