Handlebar Installation - Yamaha WaveRunner FX140 Manuel De Montage

HANDLEBAR INSTALLATION

EXPLODED DIAGRAM
INSTALLATION CHART
Step Procedure/Part name
HANDLEBAR INSTALLATION
1 Upper handlebar holder
Bolt 8 × 48 mm (0.31 × 1.89 in)
2
Screw 6 × 14 mm (0.24 × 0.55 in)
3
Q'ty
Follow "Step" order for installation.
NOTE:
2
• Align the punched marks a on the handlebar
with the top surface of the lower handlebar
holder.
• The upper handlebar holder should be
installed with the punched mark b forward.
4 NOTE:
Tighten the bolts so that the front clearance c
of the upper handlebar holder is smaller than
the rear clearance d.
Reference clearance:
4
– 7 –
Service points
c: 1.5 mm (0.06 in)
d: 3.5 mm (0.14 in)
E