Safety; Electrical Connections; Property Damage - SFA SANICUBIC GR Mode D'emploi

1. SAFETY

WARNING
This device can be used by children who are at least 8 years old and
by people with reduced physical, sensory or mental capacities or those
without knowledge or experience, if they are properly supervised or if
they have been given instructions on safely using the device and the
associated risks have been understood. Children should not play with the
device. Children should not clean or perform maintenance on the device
without supervision.

ELECTRICAL CONNECTIONS:

The electrical installation must be done by a qualified electrical engineer.
The device's power supply must be connected to ground (class I) and protect-
ed by a high sensitivity differential circuit breaker (30 mA). Devices without
plugs must be connected to a main switch on the power supply which discon-
nects all poles (contact separation distance of at least 3 mm). The connection
must be used exclusively to provide the power to the product.
If the power cord is damaged, to prevent possible danger, it must be replaced
by the manufacturer, customer service team or a similarly qualified individual.
This Operating Manual contains fundamental instructions that are to be observed when
setting up, operating and maintaining the machine/system. Hence it is imperative that this
Operating Manual be read by the technician and the responsible specialist personnel/
operators before assembly and initial operation and be permanently available at the site of
usage of the machine/system.
You are bound to observe not only the general safety instructions that can be found under
the main point Safety, but also other special safety instructions added to other main points,
for example for private usage
1.1 Labelling of notes in the operating instructions
Danger
This term defines a high risk of danger, which can lead to death or seri-
ous injury, if not avoided.
Dangerous area
This symbol characterises hazards that could lead to death or injury.
Dangerous voltage
This symbol characterises dangers associated with the voltage and
provides information on voltage protection.

Property damage

This symbol, in combination with the keyword ATTENTION, characterises
dangers to the machine and its proper operation.
4