Bresser 2051630 Mode D'emploi page 11

them into a fire. Excessive heat or improper
handling could trigger a short-circuit, a fire
or an explosion�
Privacy PROTECTION!
The binoculars are intended only
for private use� Please heed the pri-
vacy of other people� Do not use
them to look into apartments, for example�
Parts overview
b On/Off switch
c Twist-Up eyecup
d Objective adjustment
e Battery cover
f Battery compartment
g Power LED (green)
h Pouch
i Cleaning Cloth
j Carry Strap
Changing the Batteries
Simply unscrew the battery cover (4) and
insert two batteries of Type CR2 (5) (with
the positive (+) end of both batteries facing
upwards) into the battery compartment (5)�
The battery cover has a little flip-up grab
handle to make it easy to screw on and off.
Note:
When the batteries do finally need replac-
ing, this will become evident when the
green power LED (7) starts to flash, which
is the indication that the power contained
within the batteries is now low and the bat-
teries therefore need replacing� The image
stabilization feature will obviously stop
working once there is insufficient power
DE
GB
FR
NL
IT
ES
RU
11