Bresser 2051630 Mode D'emploi page 12

Masquer les pouces Voir aussi pour 2051630:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
in the batteries, so it is recommended that the
batteries be replaced when the green light no
longer remains constant and starts to flash.
Twist-up Eyecup (2)
Screw in the twist-up eyecup (2) to use the
monocular while wearing glasses� If you are
not wearing glasses, unscrew the eyecup to
achieve the required distance from the pupil�
Adjusting the Focus
You can use the objective focus adjustment
(3) to change the focus of your monocular� To
focus, look at a distant object through the mo-
nocular and turn the objective focus adjustment
(3) until the object comes into focus�
12
Using the Image Stabilization Feature
This monocular can be used with or without
the image stabilization feature switched on,
but switching it on will make viewing at higher
magnifications much easier! To switch this fea-
ture on, having first inserted the batteries, sim-
ply slide the on/off switch to the "on" position
and when you do this, a small green light will
illuminate on the corner of the monocular very
near the on/off switch. It should immediately
become obvious that this feature is switched
on because the viewing image will no longer
be so sensitive to the natural trembling of your
hand(s)�
NOTES on Cleaning
Clean the eyepieces and/or lenses only with a
soft, lint-free cloth, (e.g. microfibre cloth). To

Publicité

Table des Matières
loading

Table des Matières