Connection - ViewSonic ViewPad 10pi Mode D'emploi

Connection

The Connection tab contains information about the connection.
Autoconnect
It is possible to set Wireless Manager to connect automatically at Microsoft Windows
startup, when resuming from sleep/hibernate and after turning on the Mobile
Broadband device through the WWAN switch. Autoconnect requires the radio to be
on.
• Always connect automatically allows Wireless Manager to connect
automatically, whenever a network is available.
• Connect automatically except when roaming allows Wireless Manager to
connect automatically to your operator's network (home network). If only roaming
networks are available, Wireless Manager will not connect automatically.
• Never connect automatically disallows Wireless Manager to connect
automatically.
Click the Apply button to apply the change. The default settings can be retrieved by
clicking Default.
CAUTION!
Be aware that some applications automatically transmit data when you are connected.
Depending on subscription you may be charged for the data transfer. Be aware that
automatic connection can lead to roaming costs.
23