Chapter 2: Setup; Battery Replacement; Charging Battery - ViewSonic ViewPad 10pi Mode D'emploi

Chapter 2: Setup

Battery Replacement

Battery is permanently fixed to the device. Battery replacement should be performed
by an authorized ViewSonic service center. Please contact local ViewSonic customer
service for more information.

Charging Battery

The new battery is only partially charged out of box. To fully charge the battery,
please follow the below instruction.
1. Connect one end of the AC adapter to the charger jack.
2. Plug the other end of the AC adapter to the wall outlet to start charging.
When the battery is charging, the charge indicator LED will be flashing in amber; the
battery icon is also displayed in the status bar. When battery is fully charged, the
charge indicator LED will change to blue; if device is turned on, the battery icon will
be displayed as fully charged.
Note: Use only the provided AC power adapter for battery charging. The battery life may vary
depending on actual usage.
6