Chapter 3: Cellular Data Network (3G Data) Setup; Starting Wireless Manager - ViewSonic ViewPad 10pi Mode D'emploi

Chapter 3: Cellular Data Network (3G Data) Setup

CAUTION!
The 3G does not support hot-plug detect. Please make sure the device is powered down
when inserting or removing the SIM. Inserting or removing SIM while the device's power is
ON may cause system shutdown.
NOTE!
Your ViewPadpi may not have an SIM slot. The configurations may vary depending on the
model number. Check the actual model for specifics.
To install SIM card, you need to turn off the tablet first, then insert SIM card following
the indicative mark.
To remove SIM card, you also need to turn off the tablet first, then push to reject the
SIM card from the slot.

Starting Wireless Manager

Your Mobile Broadband Module is supplied with the Wireless Manager software
application. Wireless Manager provides a set of tools that you can use to configure
and manage mobile broadband connections on your ViewPad. When you open
Wireless Manager, the Wireless Manager main window is displayed. The main
window provides important status information and allows you to connect and
disconnect.
At Windows desktop, tap on
is running but no Wireless Manager Window is open, double-click the status icon
in the Windows notification area, or right-click the icon and select Open Wireless
Manager.
icon to open Wireless Manager. If Wireless Manager
11