Peg-Perego Viaggio 0+1 Convertible Notice D'emploi page 25

Maintenance of the padding
Brush the fabric parts to remove dust.
• Before putting the cover in the washing machine
remove the foam rubber cushion from the booster seat
from the back.
• Machine wash at a maximum of 30°C with a delicate
wash setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
°
30
How to replace the lining on the
Viaggio 0+1 Convertibile car seat
To replace the lining of the Viaggio 0+1 Convertibile
child seat:
3 5• From below, slip the safety straps back in through the
slit in the fabric (fig. A).
• Reinsert the strap into the fabric leg divider (fig. B).
36• Fasten this into the hole in the frame.
3 7• attach the strip to the attachment point of the leg
divider strap
3 8• thread the lining starting from the seat and moving
upwards, paying attention to the shape of the backrest.
3 9• Slip the headrest back on, ensuring the red tab passes
through the slit in the fabric.
40• Insert the safety belts through the strap holes in the
backrest of the car seat.
IMPORTANT: The belts must not be twisted.
41• ATTENTION: The central adjuster strap must pass
behind the plastic shield as shown.
42• Open the rear cover and fasten the belts onto the rear
support.
• Fasten the safety belts from the front (point 16).
• apply the booster seat if the child is small and you are
using the seat as a Group 0+ seat.
Serial numbers
4 3• The name of the product, production date and serial
number of the Viaggio 0+1 Convertibile can be found
under the seat.
4 4• The approval label of the Viaggio 0+1 Convertibile is
behind the backrest.
4 5• Production date of the strap.
This information is required for any complaints.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by
adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth.
Do not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Protect the product from atmospheric agents:
humidity, rain or snow. Extended exposure to sunshine
can cause colour changes in many materials.
• Store the product in a dry environment.
How to read the approval label
• This paragraph explains how to interpret the approval
label (orange label).
• This child car seat is approved to be fixed in a car in
one way only:
fixing system with safety belts with three static
fixing points or winder (the UNIVERSAL marking
indicates that the car seat is suitable for vehicles with
this kind of safety belt).
• The top of the label displays the trademark of the
manufacturing company and the name of the product.
• The letter E in a circle indicates the European approval
mark and the number indicates the country that
issued the approval (1: Germany, 2: France, 3: Italy, 4:
Netherlands, 11: Great Britain, 24: Republic of Ireland).
• Approval number: if it starts with 04, this indicates
25