Grounding Installation - Hendi PROFI LINE 410 Mode D'emploi

Grounding installation

This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Main parts of the appliance
1. Lid
2. Clamp lock
3. Ventilation holes
4. Oil fill in port
A. SET button
With the lid (1) open, press the "SET" button to
set the time of the 3 processes (VACUUM TIME,
SEAL TIME and COOLING).
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
5. Oil level display
6. Drain oil port
7. Control panel
8. Sealing bar
B. Time adjust button (
Press these buttons to adjust the time for each
process (VACUUM TIME, SEAL TIME and COOL-
ING) of setting.
9. Clamp for fixing vacuum bag
10. Chamber
11. Main ON / OFF knob
Increase /
EN
Decrease)
5