Set Up Carrying Case - Medela Invia Motion Mode D'emploi

Set up carrying case

The Invia Motion NPWT pump is intended to be worn in a carrying
case during operation. One is included in the product package.
1. Open the carrying case.
2. Slide the Invia Motion NPWT pump into the designated upper
pocket and close the Velcro strap.
3. Place the excess tubing into the designated lower pocket and
close the Velcro strap.
4. Fold the Invia Motion NPWT pump and tubing sections of the
carrying case together and align the inner Velcro tabs to secure.
5. Secure the bag by closing the lid and fastening the button.
The carrying case strap can be worn over the shoulder or around
the waist.
To wear over the shoulder, attach the strap clips to the carrying
case. To wear as a belt, thread the strap through the two loops
located on the back of the case.
Shoulder strap
14
Belt strap