When You Leave The House; Set Up Instructions - Medela Invia Motion Mode D'emploi

When you leave the house

– Check the battery status and recharge the battery if necessary
before leaving the house.
– For your convenience, place the Invia Motion NPWT pump into
the carrying case and store excess tubing safely in the tubing
pouch located in the case.
– Do not forget to take a spare canister/tubing set and the power
supply with you. The power supply can be stored in the tubing
pouch.

Set up instructions

WARNING
Check the Invia Motion NPWT pump frequently to make sure it
is running. Visually check the wound dressing, the area around
the wound and the fluid in the canister for signs of infection or
other complications as instructed by your healthcare profes-
sional.
Switch Invia Motion NPWT pump on
WARNING
Do not try to perform therapy without the supervision of your
healthcare professional.
12
Press
Display view when the Invia Motion NPWT
pump is running. Arrow is blinking .