Dual/Triple Element; Control Lock - Jenn-Air JED4430KS Guide D'utilisation Et D'entretien

Dual/Triple Element

The dual and triple elements offer flexibility depending on the size
of the cookware. Single size can be used in the same way as a
regular element. The dual and triple sizes combine single, dual,
and outer elements and are recommended for larger cookware,
large quantities of food, and home canning.
Triple Element (on some models)
A. Single size
B. Dual size
C. Triple size
Dual Element
A. Single element
B. Dual element
6
To Use Dual and Triple:
1. When On/Off is touched, all heating zones for the selected
element will be active. To reduce the number of heating zones
being used, touch BURNER SIZE. One, two, or three lights will
glow to indicate the number of burner zones being used. One
of the lights will blink.
A. Burner size
+ -
2. Touch the or keypad to select the power level. A tone will
sound each time a keypad is touched.
+
NOTE: Press and hold
quickly scroll through the power level. If a power level is not
selected within approximately 10 seconds, the element will
not turn on.
3. To change the power level while cooking, touch the
keypad to select a new power level.
NOTE: If the power level is at the minimum power setting,
press "-" minus to jump to the maximum setting.
4. To change the heating zones being used while cooking, touch
BURNER SIZE.
5. When finished cooking, touch ON/OFF for the desired element
to turn off the surface cooking area.

Control Lock

The Control Lock cooktop control avoids unintended use of the
surface cooking areas. When the cooktop is locked out, the
surface cooking areas cannot be turned on by the cooktop touch
controls.
To Lock Cooktop: Touch and hold CONTROL LOCK HOLD 3 SEC
for 3 seconds. After 3 seconds, CONTROL LOCK HOLD 3 SEC will
glow red, indicating that the cooktop controls are in the lockout
position.
To Unlock Cooktop: Touch and hold CONTROL LOCK HOLD
3 SEC for 3 seconds.
-
or keypad for a few seconds to
+ -
or