Dual/Triple Element; All Off/Lock - Jenn-Air JEC4530YB Guide D'utilisation Et D'entretien

Dual/Triple Element

The dual and triple elements offer flexibility depending on the size
of the cookware. Single size can be used in the same way as a
regular element. The dual and triple sizes combine single, dual
and outer elements, and are recommended for larger cookware,
large quantities of food, and home canning.
Triple Element (on some models)
A
B
A. Single size
B. Dual size
C. Triple size
Dual Element
A
B
A. Single element
B. Dual element
To Use DUAL and TRIPLE:
1. When ON is touched, all heating zones will be active. To
reduce the number of heating zones being used, touch ON
again. Power Level 1, the dual, or the dual and triple
indicators will glow to indicate if the burner will use 1, 2, or 3
zones respectively.
A
A. Dual element light
B. Triple element light
C. Power level 10 light
6
C
C
B
2. While the Power Level 1 light is blinking, touch the desired
Power Level on the Power Level selector bar.
Power level selector bar
A beep will sound each time a pad is touched. The lights for
the selected temperature setting, and all lower temperatures,
will glow.
NOTE: If a power level setting is not selected within
approximately 10 seconds, the element will automatically
shut off.
3. To change the temperature setting while cooking, touch the
ON pad for the desired element, and select a new
temperature on the Power Level Selector Bar while the Power
Level 1 light is blinking.
4. To change the burner zones being used while cooking, touch
ON once then again while the Power Level 1 light is blinking.
5. When finished cooking, touch OFF to turn off surface cooking
area(s) individually or ALL OFF to turn off all surface cooking
areas at once.
NOTE: The dual and triple elements will remember the setting
from the last time it was used and those burner areas will
automatically activate the next time ON is touched. To change
the activated burner zones, touch ON once while the Power Level
1 light is blinking.

All Off/Lock

The ALL OFF cooktop touch control turns off the downdraft
exhaust system and all surface cooking areas that are in use at
the same time.
The LOCK cooktop touch control avoids unintended use of the
surface cooking areas. When the cooktop is locked out, the
surface cooking areas cannot be turned on by the cooktop touch
controls.
To Lock Cooktop:
Touch and hold the ALL OFF keypad for 3 seconds. After
3 seconds, LOCK will glow red, indicating that the cooktop
controls are in the lockout position.
To Unlock Cooktop:
Touch and hold the ALL OFF keypad for 3 seconds.