Light Emitting Diodes (Led) On Battery - Stihl HSA 65 Notice D'emploi

English
AL 100 standard charger
The standard charger has no fan and
waits for the battery to cool down before
starting the charging process. The
battery is cooled by the flow of air in the
room.
End of charge (rapid and standard
chargers)
The charger switches itself off
automatically when the battery is fully
charged:
– Light emitting diodes on the battery
go off
– The light emitting diode on the
charger goes off
– Charger fan switches off (rapid
charger only)
Remove the charged battery from the
charger.
38
Light Emitting Diodes
(LED) on Battery
Four light emitting diodes indicate the
battery's state of charge.
1
N
Press button (1) to activate the
display – the display goes off
automatically after 5 seconds.
The light emitting diodes can light up or
flash green or red.
Light emitting diode lights up
green.
Light emitting diode flashes
green.
Light emitting diode lights up
red.
Light emitting diode flashes red.
During Charging Process
The light emitting diodes light up and
flash to indicate the progress of charge.
During charging the capacity that is
currently being charged is indicated by a
green flashing light emitting diode.
0 - 20 %
20 - 40 %
40 - 60 %
60 - 80 %
80 - 100 %
When the charging process is
completed, the light emitting diodes on
the battery go off automatically.
If the light emitting diodes on the battery
flash or light up red – see "If the red light
emitting diodes light up / flash".
HSA 65, HSA 85