EUROM 1600 Manuel D'utilisation page 24

Assembling the push bar and handgrip:
 Attach the loose part of the push bar between the machine's part of the push bar and the
handgrip's part of the push bar (hose holder at the side of the hose) using the two large
screws and the wing nuts.
 Attach the electrical cable alongside the push bar using the cable holders.
Assembling the collection bag:
Grab the handle of the collection bag and slide it over the outlet with its recesses entirely
over the projections (A).
 Rotate the handle clockwise as far as possible to affix the bag onto the machine (B).
 Suspend the hook at the backside of the bag from the ring on the push bar (C).
Assembling the blow hose:
 Connect the blow hose to the blow mouth
by pushing the front of the blow hose into
the aperture of the blow mouth (D).
 Hang the blow hose in its holders: one on
the machine and two on the push bar.
Your leaf vacuum is now completely
assembled and ready for use (see the photo
under DESCRIPTION & ASSEMBLY.
USE
The leaf vacuum may be used only when all components are assembled (see

Before inserting the plug into the socket, check
whether the electrical cable is loosely attached
to the cable holders on the push bar.
 Guide the electrical cable – the piece of that
holds the plug – through the opening in and
around the cable hook of the handgrip (see
Figure E). This prevents excess tension on the
cable connections of your machine.
 Check whether the machine is switched OFF (O
of the ON/OFF switch is pushed in).
 Check the work area for obstacles or strange objects. Make sure that people (especially
children) and pets are at a safe distance.
 If you have observed all safety instructions, you can connect the extension cord and
24
DESCRIPTION & ASSEMBLY.