EUROM MM3500 Manuel D'instructions page 31

3. Unscrew the fuel cock (in the ON position).
4. Switch on the motor: press I.
5. Put the choke lever in the choke position. If the motor
is still warm, you can skip this step.
6. Now pull gently on the pulling cord until you
feel resistance. This is the compression point.
Let the cord run back to its original position
and now pull quickly and strongly until the
motor starts. If necessary, repeat this several
times.
WARNING!
CAUTION!
To prevent anyone from being injured when pulling the cord,
make sure that there are no bystanders (especially children) or
pets near the generator.
Do not let the handle of the pulling cord spring back against the
motor, but guide it back gently to the starting position to prevent
damage to the generator.
31