Risk Of Explosion; Additional Rim/Tyre Information; Intended Machine Use; Personnel Training - Corghi A 2030 Manuel D'utilisation

Masquer les pouces Voir aussi pour A 2030:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3. Fully bleed air pressure system before disconnecting power supply line or other pneumatic
components. Air is stored in a reservoir to operate the inflation jets.
4. Activate the air inflation jets only if the rim is correctly clamped on the tyre changer (if
required) and the tyre is completely mounted.

1.3. ADDITIONAL RIM/TYRE INFORMATION

Wheels equipped with pressure sensors and special rims or tyres could require
particular work procedures. Consult wheels and tyre manufacturer's service manuals.

1.4. INTENDED MACHINE USE

This machine must only be used to demount and mount vehicle tyres from/on the rims, using
the provided tools. Any other use is improper and may result in injury.

1.5. PERSONNEL TRAINING

1. Employers are responsible for providing a training program for all employees who work on
the wheels concerning the hazards deriving from maintenance and the safety procedures
to be observed. Service or maintenance refer to mounting and demounting wheels and all
the correlated activities, such as inflation, deflation, installation, removal and handling.
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
DANGER

• RISK OF EXPLOSION

• Never exceed tyre pressure recommended by
tyre manufacturer.
• Always match the tyre and rim dimensions.
• Take care to avoid any damage to the tyre.
• During inflation, keep outside the vertical
cylinder area occupied by the wheel.
CAUTION
EN
91

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A 2025A 2022A 2018A 224 aA 224

Table des Matières