Corghi A 2030 Manuel D'utilisation page 124

a
b
c
d
e
42
The lubricant flow rate adjustment is carried out by turning the screw on the element "L",
(fig.42b); normally this unit is pre-calibrated to a pressure of 10Bar, with SAE20 viscosity
lubricant in order to make a drop of lubricant come out, which can be seen from the
specific cover, every 4 times the bead breaker is operated.
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
124