Corghi A 2030 Manuel D'utilisation page 122

Clamping plate not adjusted.
➥ Adjust the plate.
Clamping cylinders faulty or not working.
➥ Replace cylinders or seals.
Lack of supply to clamping cylinders.
➥ Check the operation of controls and pneumatic circuit.
No air passage through valve
➥ Replace the valve.
Vertical arm ascends under strain
Faulty clamping plate.
➥ Replace the plate.
Clamping plate not adjusted.
➥ Adjust the plate.
Pole not tilted
Faulty pole tilting cylinder.
➥ Replace the pole tilting cylinder.
No air supply to cylinder.
➥ Replace the cock.
Air leak from the valve.
➥ Replace valve or pole tilting cylinder.
The pole tilts violently or too slowly
Release valve incorrect setting.
➥ Adjust the discharge regulators.
Hare: speed increase.
Turtle: speed reduction.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥ Replace the pressure gauge.
The lubricator does not work
No oil in lubricator.
➥ Top up lubricator with SAE20 non-detergent oil.
Lubricator broken.
➥ Replace the lubricator
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
122