Inserting The Permanent Fabric Filter (Optional) - Hillyard Trident WD21V Manuel D'utilisation

INSERTING THE PERMANENT FABRIC FILTER (OPTIONAL)

To insert the permanent fabric filter in the collection tank, proceed as follows:
1. Make sure the machine is in a safe condition (read "MACHINE SAFETY").
ATTENTION: you are advised to always
wear protective gloves, to avoid the risk of
serious injury to your hands.
2. Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the
tank. Rotate the levers as shown by the arrow in the picture on the right.
3. Use the handle (2) on the vacuum head unit to remove it from the collection tank.
4. Rest the head carefully on the ground.
5. Insert the permanent fabric filter (3) in the tank.
6. Insert the filter tensioner (4) in the permanent fabric filter.
7. Use the handle (2) on the vacuum head unit to position it above the permanent fabric filter.
8. Fix the vacuum head to the collection tank by coupling the hooks (1) on the side of the tank.
Rotate the levers as shown by the arrow in the picture on the right.
15