Cleaning The Accessories; Cleaning The Front Squeegee (Optional) - Hillyard Trident WD21V Manuel D'utilisation

The good condition of the accessories ensures better vacuuming and floor cleaning, as well as
a longer working life for the vacuum motor. To clean the accessories, proceed as follows:
1. Take the machine to the maintenance area.
2. Make sure the machine is in a safe condition (read "MACHINE SAFETY").
ATTENTION: you are advised to always
wear protective gloves, to avoid the risk of
serious injury to your hands.
3. Remove the accessory from the extension. Clean it under running water and place it in the
object-holder pocket.
4. Remove the female part of the extension from the male part. Clean it under running water
and place it in the object-holder pocket.
5. Remove the extension from the nozzle in the vacuum hose. Clean it under running water
and place it in the object-holder pocket.
6. Press the button (1) on the vacuum nozzle.
7. Remove the vacuum hose (2) from the hole on the vacuum nozzle (3).
8. Clean the vacuum hose under running water to remove any objects that might prevent the
accessory from working properly.
9. Repeat the operations in reverse order to reassemble all the parts.
The careful cleaning of the whole vacuum unit ensures better drying and cleaning of the floor as
well as a longer vacuum motor life. To carry out the cleaning of the squeegee unit, proceed as
1.Take the machine to the maintenance area.
2.Make sure the machine is in a safe condition (read "MACHINE SAFETY").

CLEANING THE ACCESSORIES

CLEANING THE FRONT SQUEEGEE (OPTIONAL) WD21V
follows:
26