Daily Maintenance; Emptying The Collection Tank - Hillyard Trident WD21V Manuel D'utilisation

PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE

EMPTYING THE COLLECTION TANK

To remove solid waste from the collection tank, proceed as follows:
1.Take the machine to the designated recovery tank drainage place.
2.Make sure the machine is in a safe condition (read "MACHINE SAFETY").
ATTENTION: you are advised to always
wear protective gloves, to avoid the risk of
serious injury to your hands.
3.Free the vacuum head from the collection tank by releasing the hooks (5) on the side of the tank.
Rotate the levers as shown by the arrow in the picture on the right.
4.Use the handle (2) on the vacuum head unit to remove it from the collection tank.
5.Rest the head carefully on the ground.
6.Using the handle, rotate the collection tank until the handle is touching the ground.
7.Remove the dirt from the collection tank.
ATTENTION: remember to place the dirt
collection container on the ground before
emptying out the dirt.
8.Repeat the operations in reverse order to reassemble all the parts.
To remove liquid waste from the collection tank, proceed as follows:
1. Take the machine to the designated recovery tank drainage place.
2. Make sure the machine is in a safe condition (read "MACHINE SAFETY").

DAILY MAINTENANCE

ATTENTION: you are advised to always
wear protective gloves, to avoid the risk of
serious injury to your hands.
24