Safety Instructions; Use According To The Intended Purpose; Safety Instructions In This Operating Manual - Habegger HIT-TRAC 16 E Mode D'emploi D'origine

3

Safety instructions

HABEGGER's motor-driven rope pulling machine HIT-TRAC 16 is state-of-the-art
equipment. It has been equipped with safety devices according to acknowledged safety
standards, guidelines and laws in order to provide effective protection against accidents.
However, laws, regulations and safety devices cannot protect against carelessness and
negligence.
Only use a motor-driven rope-pulling machine that is in serviceable condition and observe
the operating instructions.
Prior to working with the motor-driven rope-pulling machine, please read the following
safety instructions carefully and observe them.
We are concerned about your safety!
3.1

Use according to the intended purpose

The motor-driven rope-pulling machine HIT-TRAC 16 is intended to pull, lift, secure and
lower loads. The permissible pulling force is:
HIT-TRAC 16:
▲
The HIT-TRAC must not be used, under any
circumstances, to lift persons. No person should ever
take position on a structure suspended by a HIT-TRAC.
In the interest of your health, please observe the safety instructions on the machine and in
this operating manual!
3.2

Safety instructions in this operating manual

The following symbols and descriptions are used to indicate dangers, instructions and
important information:
І
This points out particularly important information which you
have to observe to use the described technology acc. to its
intended purpose
∆
Attention! This indicates that the machine, parts of the machine
and the environment could be endangered
16 kN (1600 kg).
57