Using The Blind - Dometic SEITZ Instructions De Montage Et De Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Dometic
4

Using the blind

4.1
Closing the blind
A
NOTICE! Risk of damage due to a build-up of heat between
the roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of
the way.
➤ Connect the handle strip of the blackout roller blind (fig. 9 1, page 7)
with the handle strip of the flyscreen (fig. 9 2, page 7).
To do so, press the push buttons (fig. 9 3, page 7) together and draw
both handle strips together.
➤ Lock the flyscreen (fig. 0 2, page 7) into place on the blackout roller
blind (fig. 0 1, page 7).
➤ Press the push buttons (fig. 0 3, page 7) and push the roller blinds that
are now locked together into the desired position.
➤ Release the push buttons and latch the roller blinds into the next catch
point.
There are catch points at the respective end positions of the roller blinds
and in the centre of the guide rails.
4.2
Opening the blind
➤ Guide the roller blind (fig. a 2, page 8) downwards with your hand.
➤ Latch the roller blind into the lowest position, so that the flyscreen is rolled
up in its cassette.
➤ Separate the roller blinds by pressing the locking mechanism (fig. a 3,
page 8).
Do not let the blackout roller blind spring back.
➤ Latch the blackout roller blind (fig. a 1, page 8) into the desired catch
point.
EN
Using the blind
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1302

Table des Matières