Sun Microsystems StorEdge 3900 Manuel D'installation Et De Service page 117

Create VLUNs (Création de LUN virtuels) : possibilité de créer des LUN
virtuels dans un groupe de disques ou de répartir tous les LUN virtuels dans
plusieurs groupes de disques en une seule exécution. La liste des paires de
moteurs de virtualisation disponibles s'affiche. Par exemple :
Do you want to create VLUNs in a single or multiple disk pools [s | m]: s
BUSY VIRTUALIZATION ENGINE PAIRS
--------------------------------
NOTE : Currently NO virtualization engine pair(s) are being configured.
AVAILABLE VIRTUALIZATION ENGINE PAIRS
1) v1
2) v2
3) Return
Select option above:> 2
DISK POOLS (free space)
1) t3b10(474.2GB)
2) t3b11(477.2GB)
3) Return
Select option above:> 1
NOTE : Creation of each VLUN can take up to 1 minute.
Please enter the number of VLUN(s) that need to be created: 2
Please enter the size in GB for each VLUN (1 GB increments): 2
Do you want to specify the zones ? [y|n]: n
Do you want to specify a name for the VLUN? [y|n]: y
Please enter a name for the VLUN (There is a max length of 10 chars including a
unique id prefix that will be added automatically):test
This functionality requires a check that T3+ physical lun is mounted.
Please enter the Sun StorEdge T3+ Array password: mot de passe
Creating VLUN(s) on v2 ........
Checking that associated T3+ physical lun is mounted...
VLUN T16387 : Created successfully in diskpool t3b10 with name 1test.
VLUN T16388 : Created successfully in diskpool t3b10 with name 2test.
NOTE: Updating map, v2 will be unavailable until completed.
WARNING: VLUNs just created were not added to any zones.
This should be done to avoid data corruption.
Refer to addtovezone command.
Chapitre 5 Utilitaires de configuration 5-35