Stanley FATMAX FMEG210 Mode D'emploi page 4

@
Intended use
Safety instructions
ENGLISH
General power tool safety warnings
(Original instructions)
Your Stanley Fat Max FMEG210 and FMEG220 angle
grinders have been designed for grinding and cutting metal
and masonry using the appropriate type of cutting or grinding
Warning! Read all safety warnings and all
instructions.
Save all warnings and instructions for future reference.
1. Work area safety
a. Keep work area clean and well lit.
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
or dust.
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
4
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
of drugs, alcohol or medication. A moment of inattention
protection.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on.
e. Do not overreach. Keep proper footing and balance at
all times.
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application.
designed.
b. Do not use the power tool if the switch does not turn it
on and off.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.