Stanley FATMAX FMEG210 Mode D'emploi page 11

Use
Maintenance
Switching on and off
Hints for optimum use
Warning!
surface.
tool operates at high speed.
Once a cut is begun and a notch is established in the
Warning!
Carefully guide the cable in order to avoid accidentally
cutting it.
provides optimum protection from the grinding or cutting
disc.
Warning!
and the other hand around the main handle.
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning!
Troubleshooting
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Safely dispose of the old plug.
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Recommended fuse: 13 A.
Problem Possible cause
Cord not plugged
start. in.
damaged.
Possible solution
Plug tool into a
replaced at a Stanley
FatMax service center
or authorized
servicer.)
11