Features
Assembly
ENGLISH
Voltage drops
Fitting
(Original instructions)
Removing
Inrush currents cause short-time voltage drops. Under
be affected.
Fitting the side handle
Fitting and removing grinding discs
3. Guard
4. Side handle
Warning!
purposes only (type 27). If the unit is intended to perform
Max service centres.
the required position.
tool.
force.
notches (7).
Remove the guard from the tool.
Warning!
in the tool.
Warning!
8
Fitting
Removing
Surface grinding with grinding discs
Edge grinding with grinding discs
technical data).
Fit the guard as described above.
tool to operate at high speed. Grinding rate is greatest