Caution; Introduction; Software Instructions; Wireless Console - Elite REALPOWER Mode D'emploi

EN
Congratulations on your purchase of the Elite RealPower cycling simulator
• THE FLYWHEEL OF THE UNIT IS VERY
HEAVY. EVEN MINOR IMPACTS COULD BEND
THE SHAFT AND MAKE THE ENTIRE SYSTEM
UNUSABLE
• DO NOT STOP THE ROTATION OF THE
BICYCLE WHEEL BY USING CALIPER OR DISK
BRAKE. THIS SERIOUSLY DAMAGES THE
ROLLER AND THE TIRE
• DO NOT CONNECT THE USB KEY TO THE
COMPUTER BEFORE
REALPOWER SOFTWARE

INTRODUCTION

Elite RealPower is an electronic device for indoor
training and tests; it interfaces with a PC (Win-
dows) by means of a console fitted to the handle-
bar of your bike.
Elite RealPower allows you to view real-life
courses while training which will run at the same
speed you are running on your trainer offering a
highly realistic on-road simulation. Elite RealPo-
wer allows you to programme any kind of route.
The software automatically adjusts resistance
depending on gradient, speed and weight and
indicates heart rate, power, speed, height, pe-
dalling frequency, distance, time and other im-
portant information.
Elite RealPower allows you to save all racing and
test results for future analysis and print the re-
lative reports.
Please read this manual with care in order to
become perfectly familiar with the product and
how it works.
22

CAUTION

INSTALLING
ENGLISH

SOFTWARE INSTRUCTIONS

This manual does not give any instructions re-
garding use of the programme. A complete guide
to using the programme is given in the program-
me Help.
To access the Help guide it is necessary to install
the programme. The instructions for installing
the programme are given in the section "Use of
RealPower with the computer – Programme in-
stallation".
After installing the programme, the Help guide
can be accessed in two different ways:
• press button F1 on the keyboard;
• select "Help – Help Contents" from the
THE
programme menu.

WIRELESS CONSOLE

This roller makes use of wireless data transmis-
sion technology, which allows the RealPower pro-
gramme to communicate with the roller without a
cable and using only a USB wireless key for con-
necting to the PC.
The console also has a 4-button touch pad al-
lowing the software to be used even when seated
on the bicycle. In fact, thanks to the keys on the
console, you can change screens and manage the
various programme functions without getting off
the bicycle.
The keys use "touch" technology, i.e. without me-
chanical components, which detects the presence
of a finger.
On the front part of the console there are three
LED's used to indicate console status.
Radio communication uses the frequency of
2.4Ghz.
Note: the presence of high voltage power lines,
traffic lights, railway electric lines, bus or
tram electric lines, television sets, cars, cycle
computers, gym equipment and mobile phones
within the operating range of the console or the