X-lite X-1004 Sécurité Et Instructions D'utilisation page 28

N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
(Available depending on the product version).
Your X-Lite helmet is factory-preset to be equipped with the N-Com communication
system. During the communication system installation (see the specific instructions
contained in the N-Com kit), it will be necessary to remove the foam material fillers
located in the polystyrene cheek pads next to the N-Com earphones seats.
WARNING
- The above-mentioned fillers should only be removed if the helmet is used with
an N-COM compatible system installed.
28